阿自倍尔株式会社
High-Accuracy Position Sensors K1G-C04M
Spec
- M-Ⅱ
- M-Ⅲ
- M-4
子站
传感器
Features
- The controller, K1G-C04M supports MECHATROLINK-Ⅲ.
- It achieves high-speed at a baud rate of 100 Mbps and high-reliability communications, furthermore, realizes the synchronous communication.
- Only two wires are required between the PC/PLC and the K1G-C04M for wiring. You can reduce greatly wiring time and save space.
- Using the Pro-face GP4000 series allows the setting and checking of a parameters used by the K1G series.
- The Pro-face Remote HMI allows the setting and checking of parameters using a Wi-Fi-equipped tablet.
Specifications
| Catalog listing | K1G-C04/K1G-C04G | K1G-C04M/K1G-C04MG | ||
|---|---|---|---|---|
| Compatible sensor | K1G-S□□ | |||
| Max. number of connected sensors | 4 | |||
| Reading | Min. display unit | 0.1 μm | ||
| Display range | With K1G-S07 | 0 to 7 mm -3.5 to +3.5mm can be selected | ||
| With K1G-S15 | 0 to 15 mm -7.5 to +7.5mm can be selected | |||
| Measurement cycle (Output update cycle) |
250μm/500μm/1ms (switchover) | |||
| Analog output | 4 outputs: 4-20 mA or 1-5 V (all outputs are switched over at once) |
- | ||
| Digital output | 8 outputs: NPN or PNP transistor (all outputs are switched over at once) |
- | ||
| Digital input | 4 inputs: non-voltage contacts and NPN or PNP open collector (all points are switched over at once) | - | ||
| Communications | RS-485 (Modbus RTU) | MECHATROLINK-Ⅲ | ||
| Supply power | DC12 to 24±10% | |||
| Operating temperature | 0 to 50°C (0 to 35°C if gang-mounted) | |||
| Storage temperature | -20 to 70°C (without freezing) | |||
| Operating humidity | 30 to 85 % RH (without condensation) | |||
| Vibration resistance | 2m/s2 (10 to 60 Hz), 2 h each in X, Y, and Z directions | |||
| Protection circuit | Power reverse connection protection | |||
MECHATROLINK specifications
| M-Ⅲ | |
|---|---|
| Profile | Standard I/O |
| Data size | 32byte, 48byte |
| Transmission cycle | 0.25/0.5/1-64 ms [Selectable by 0.5ms] |
Contact Information
Azbil Corporation Advanced Automation Company
| Marketing Dept., Sensor Group2, | 1-12-2, Kawana, Fujisawa-shi, Kanagawa-ken, 251-8522, Japan | TEL : +81-466-20-2232 | FAX : +81-466-20-2193 |
E-mail : n.kiire.uf@azbil.com
URL : http://www.azbil.com/
Updated on：Apr 4, 2019
