RKC INSTRUMENT INC.
Module type digital temperature controller
Spec
- M-Ⅱ
- M-Ⅲ
- M-4
Slave
Sensor
Features
Multi-zone temperature control system can be easily achieved by connecting temperature control modules to a communication converter module for MECHATROLINK.
Temperature control module can be selected from 2-zone or 4-zone modules. Maximum of 31 temperature control modules (64 zones) can be connected.
Digital input/output modules can be also connected to handle contact signals for temperature alarm output and operation mode switching.
Module model code
Communication converter module: COM-MY
Temperature control module: Z-TIO
Digital input/output module: Z-DIO
Temperature control module can be selected from 2-zone or 4-zone modules. Maximum of 31 temperature control modules (64 zones) can be connected.
Digital input/output modules can be also connected to handle contact signals for temperature alarm output and operation mode switching.
Module model code
Communication converter module: COM-MY
Temperature control module: Z-TIO
Digital input/output module: Z-DIO
Specifications
| Item | Specifications |
|---|---|
| Measuring input | Number of inputs: 2 points/module, 4 points/module Input type: Thermocouple, RTD, DC current, DC voltage *Universal input (Z-TIO) |
| Control method | PID control with autotuning, ON/OFF control (Z-TIO) |
| Control output | Relay contact output, Voltage pulse output 0/12V DC, Continuous DC voltage output DC current output, Triac output, Open collector output (Z-TIO) |
| Alarm | Temperature alarm, Heater break alarm, Control loop break alarm (Z-TIO) |
| Digital input | Number of input: 8 points/module Input method: Voltage contact input (Open: Less than 5V DC, Close: More than 17.5V DC) Function: Run/Stop, Remote/Local, Auto/Manual, Memory area selection, Alarm interlock reset (Z-DIO) |
| Digital output | Number of output: 8 points/module Output method: Relay contact output, Open collector output Function: Alarm output (Temperature alarm, Heater break alarm, Control loop break alarm) (Z-DIO) |
| Host communication | Communication method: RS-485, RS-422A Communication protocol: ANSI X3.28-1976 sub-category 2.5B4 (RKC standard) |
| Power supply | 24V DC |
MECHATROLINK specifications
| M-Ⅰ | M-Ⅱ | |||
|---|---|---|---|---|
| 17-byte | 17-byte | 32-byte | ||
| Command | Intelligent I/O | × | × | × |
| Transmission cycle | 2ms | 1ms to 8ms | ||
Contact Information
RKC INSTRUMENT INC.
| 16-6 Kugahara 5 Chome Ohtaku Tokyo 146-8515 Japan | TEL : +81-3-3751-9799 | FAX : +81-3-3751-8585 |
URL : https://www.rkcinst.co.jp/english/
Updated on：Apr 4, 2019
